Our offert

Solar street lamp – Active lighting for pedestrian crossings

Solar Street Light – Active Pedestrian Crossing Lighting D-6 “SIGN FLASH / WALKING PEDESTRIAN”

The solar active pedestrian crossing system of the “SIGN FLASH” or “WALKING PEDESTRIAN” type is an advanced solution designed to improve road safety. Powered exclusively by solar energy, the installation does not require a 230V grid connection or underground cabling. It is an economical, eco-friendly solution ideal for locations without access to electrical infrastructure.

How does the solar active pedestrian crossing system work?

The system uses a dual narrow-beam motion sensor that activates the warning signal only when a pedestrian approaches the crossing. A radio channel synchronizes the operation of both signs on opposite sides of the road, creating a clear and visible signal for drivers.

Solar street lamp dedicated to pedestrian crossings

The lamp is equipped with a specially designed asymmetric LED luminaire that precisely illuminates the zebra crossing and the pedestrian silhouette while eliminating glare for drivers.

  • 100% solar-powered,
  • photovoltaic panel + gel battery,
  • automatic control and optimized operation,
  • zero electricity cost,
  • year-round operation – 24 hours a day, 7 days a week.

High visibility, brightness control and autonomous operation

The system provides 10–12 hours of full-power operation each day. Battery capacity ensures a minimum of 40 hours of operation without sunlight (4 days). Each lamp offers the ability to set a 5-step operating mode, adjusting the percentage of luminous flux output.

Standards, quality and certified components

We use only Polish-made LED luminaires of the highest quality, certified by ZETOM or ENEC. All structures meet the requirements of:

  • WR-D-41-4 – models and standards for proper pedestrian crossing lighting, recommended by the Ministry of Infrastructure (2018),
  • strict lighting standards for pedestrian crossings,
  • IP65 / IP66 protection and maximum operating durability.

Applications of the solar active pedestrian crossing system

  • schools, kindergartens and educational facilities,
  • public transport stops,
  • local and residential roads,
  • rural and peripheral areas,
  • hazardous locations and areas with limited visibility,
  • locations without access to the power grid.

Why choose our solar pedestrian crossing system?

  • zero energy cost,
  • no need for cabling,
  • minimal maintenance and servicing,
  • quick installation with no earthworks,
  • improved safety and comfort for residents,
  • eco-friendly, modern solution for cities and municipalities.

System operating time

10–12 hours per day (full power), minimum 40 hours of autonomy without sunlight. Supports reduced-power modes and lighting schedules.

Compliance with WR-D-41-4 requirements

Our systems fully comply with the WR-D-41-4 guidelines for proper lighting of pedestrian crossings – standards recommended by the Minister of Transport and approved by the Ministry of Infrastructure (2018).

Comprehensive service – from design to maintenance

Our offer includes:

  • system design and power configuration,
  • production of solar and hybrid sets,
  • delivery and professional installation,
  • full service and warranty support.

Ensure the safety of your residents – with zero energy cost, no cabling and no interference with existing infrastructure.

To prepare a commercial offer / send detailed technical specifications, please
TECHNICAL SPECIFICATION
Solar LED Street Lamp: SLU-38W/400W/6m
Photovoltaic PanelPanel power: > 1 x 450W 48V  (144-cell) HALF-CUT
Monocrystalline tempered solar glass (3.2 mm thickness), anti-reflective coating.
Panels tested according to IEC 61215 for snow load up to 5400 Pa (approx. 5.4 kN/m2)
LED Street LuminaireLED power: 38W DC – Asymmetric luminaire dedicated for pedestrian crossings
– Polish-made luminaire
LED efficiency: 138–160 lm/W
Lifetime: > 100,000 hours
Protection rating: IP66
Luminous flux: > 5,300 lm (behind glass – after losses)
Luminous flux: > 6,100 lm (before glass)
Operating temperature: -40℃ ~ 60℃
Impact resistance: IK09
Certification: ZETOM or ENEC
Solar ControllerMPPT – 24V 20A
Light output and operating time controlled through intelligent MPPT management.
Waterproof – IP67 class.
Built-in dusk sensor, full automatic electronic protection and battery safeguarding.
Battery2 x 120Ah 12V – NPG gel batteries for solar installations, fully sealed, deep-cycle, maintenance-free,
> 2,000 discharge cycles
Battery BoxPVC material, installed underground, waterproof – hermetic.
Heat-dissipating, anti-burglary, lined with thermal inserts.
Optional: enclosure made of stainless steel AISI 304 with EPDM gaskets (intended for installation in wet, rocky, clayey or otherwise challenging soil conditions).

Steel Pole

weight approx. 210 kg

Made in Poland

Total height: 7 m, hot-dip galvanised steel in accordance with EN ISO 1461
Pole model: "BrasiT", Steel grade: S235, frame and bracket: steel S235
LED luminaire mounting height: 6 m
Wall thickness of the steel pole base: > 6,3 mm
Round-section pole – compliant with EN 40-5:2002.
Vehicle impact class “0” according to EN 12767.
Stability certification according to EN 40-3-1.
Solar pole structure compliant with PN-EN 1090
The pole, including the structure for photovoltaic panels, is designed for wind zones I, II or III in accordance with PN-EN 1991-1-4.

Frame for panels with extension arm for LED luminaire with the possibility of rotation around the axis of the pole 360º - independently

Foundation
weight approx. 400 kg

Complete prefabricated foundation B-160 (1600/400) - 4xM24/250, certified,
Compliant with PN-EN 14991:2010, system 2+

Active D-6 Sign
(roadside)

Composite active sign D-6 “SIGN FLASH” with 2 FLASHING MODULES
Diameter Ø200 mm or “WALKING PEDESTRIAN”
– Maximum power consumption: Only 3W!
– Waterproof: IP67 (sign face)
– Thickness: only 2 cm!
– Photometric parameters designed according to PN-EN 12352
– D-6 SUPER SIGN FLASH activated by a narrow-beam motion sensor LX-802N, which activates the signs only when a pedestrian is detected near the crossing
– Solar power supply: BrasiT system – sign face mounted with clamps to the pole

Operating time11 hours / day (full power), battery capacity for 4 consecutive cloudy, rainy and windless days –
min. 44 h of solar operation without sun – Five-period operating mode available: adjustable LED luminaire power (%) during night hours, enabling extended autonomous operation.

 

To prepare a commercial offer / send detailed technical specifications, please
Downloadable catalogs
Check out the current catalogs presenting a wide range of products.
They trusted us
Join the group of satisfied customers.
Municipalities
Zakopane
Biała Piska
Brzeziny
Prochowice
Trzebowisko
Teresin
Leżajsk
Lubicz
Kraśnik
Szydlłowo
Enterprises