Our offert

Hybrid street lamp 2x20W

Hybrid LED Street Light 2x20W

2×20W Hybrid LED Street Light is an efficient solution for lighting streets, sidewalks, and public spaces. The system operates without a grid connection, using both solar and wind energy to ensure continuous performance even in unfavorable weather conditions. The hybrid design significantly reduces energy costs while improving safety in the area.

Key advantages:
• Light output: 2×20W LED — bright and energy-efficient illumination
• Full energy independence — zero grid electricity costs
• Dual energy source: photovoltaic panel + wind turbine
• Automatic control — activates at dusk and adjusts brightness
• High durability and weather resistance
• No need for cabling or trenching during installation
• Applications: streets, residential areas, parking lots, pedestrian pathways

To prepare a commercial offer / send detailed technical specifications, please

Hybrid street lamp: HLU-2x20W/400W/400W/6m

Hybrid street lamp: HLU-2x20W/400W/400W/6m
Wind turbine

Rated power: 400W 24V / Maximum output power: 500W
Number of blades: 3 pcs. / Material – Carbon Fiber / Diameter: Ø 1330 mm
+ external charge controller, hermetic IP67 for wind turbine

Photovoltaic panel

Panel power: 1 x 450W (144 cells)
Monocrystalline cell, tempered solar glass (thickness 3,2 mm), covered with an anti-reflexive layer, panels tested in accordance with IEC 61215 for snow load of up to 5400 Pa (approx. 5,4 kN/m2) and IEC 61730,

LED lighting fitting
Made in Poland

LED POWER: 2 x 20W DCPolish Made LED Fixture PL
LED luminous efficacy: 138 – 160 lm/W
Service life: > 100,000 hours
Protection degree: > IP66
Luminous Flux: > 2 x 2 700 lm (behind glass – after losses)
Luminous Flux: > 2 x 3 200 lm (against losses - in front of glass)
Working temperature: -40℃ ~ 60℃
Impact resistance: min. IK 09
Certificate: ZETOM / ENEC

Solar controller

1 pcs. x MPPT 20A 24V

the light as well as time of operation by MPPT intelligent control, water resistance IP67 class, in-built twilight sensor, automatic brake and cut-off of powered load

Battery2 pcs. x 120AH 12V – NPG gel battery for solar installations, fully sealed, full deep discharge cycle,
maintenance-free, > 2,000 discharge cycles
Battery boxPVC material, placed underground, water resistant type, disperses heat, anti-burglar, PVC pipe for the cables included in the set
Steel pole
weight approx. 230 kg
Made in Poland
Total height: 8m, hot galvanized steel in accordance with EN ISO 1461
pole model: "BrasiT", steel S235, frame and bracket: steel S235
LED fitting hung at: 6m, round pole – in accordance with EN 40-5:2002
a vehicle hitting: "0" class in accordance with EN 12767
certificates of structural stability in accordance with EN 40-3-1
Construction conforms to: PN-EN 1090
The pole along with the construction for the solar panels is adjusted to: “I, II or III wind zone in accordance with PN-EN 1991-1-4”
The solar panel frame with LED luminaire arm allows 360° rotation around the pole axis — independently.
Foundation
weight approx. 450 kg
F-200 V43, prefabricated foundation, certified, Meeting PN-EN 14991:2010 standard in accordance with the 2+ system adjusted to: I, II or III wind zone
Working time

10-12 hours / day (full power) - battery capacity of up to 4 continuously cloudy and rainy days without sun - min. 40h without sun. There is the option of increasing the independence of lamps work.
Possibility to set 5 periodic time lamp working (regulation in % of the power intensity of the LED lamp operating stream).

Notes:

  1. The above system configurations are based on our actual project experience. They are suitable for areas with an average annual peak solar irradiation of 3.5–4 hours per day.The battery capacity is designed to store enough energy for 4 consecutive cloudy or rainy days.
  2. The system configuration can be customized based on the specific requirements of the customer/project and local weather conditions.
  3. The batteries are recommended to be installed underground inside a battery box. This prevents exposure to high summer temperatures and extreme winter cold. They are waterproof and theft-resistant, while also being very easy to replace later in the service life. The battery box can also be mounted above ground or on the lamp pole.
  4. The pole can be customized to meet the customer’s specific requirements.
  5. All components are compliant with required certificates and approvals.
  6. The main structural elements — including the pole with a photovoltaic bracket and the foundation — are certified by an independent, notified certification body. They are safety-tested in terms of load-bearing requirements related to system weight and wind pressure at the intended installation site. The poles are certified according to: PNEN 1090 and EN 40-5 for special load-bearing and construction structures.
    Any company that does not possess — or cannot provide — such certificates has no right to sell structures that may endanger public safety and could lead to a structural disaster.
  • The possibility of purchasing an infra-red remote control and Wi-Fi interface with software to program and control the lamps from a distance.
  • Poles can be painted in any colour from the RAL range for an additional price.
To prepare a commercial offer / send detailed technical specifications, please
Downloadable catalogs
Check out the current catalogs presenting a wide range of products.
They trusted us
Join the group of satisfied customers.
Municipalities
Zakopane
Biała Piska
Brzeziny
Prochowice
Trzebowisko
Teresin
Leżajsk
Lubicz
Kraśnik
Szydlłowo
Enterprises