Our offert

Hybrid street lamp 40W

40W Hybrid LED Street Light

40 W Hybrid LED Street Light – efficient lighting for roads, streets and pedestrian crossings

The Hybrid LED Street Light 40W is an advanced technological solution designed to provide strong, safe and reliable illumination for roads, urban streets, pedestrian crossings, intersections and communication routes. Its key advantage is full autonomy – the system operates using both solar and wind energy, ensuring dependable lighting throughout the year without any connection to the electrical grid.

Dual energy source – guaranteed uninterrupted operation

Hybrid LED street lights 40W use two independent renewable energy sources:

photovoltaic panel – generates energy on sunny days and charges the battery,
wind turbine – provides energy during lack of sunlight, heavy cloud cover or nighttime,
intelligent controller – automatically switches the light on and regulates its brightness.

Thanks to this dual-source system, the hybrid lamp ensures stable lighting even in winter: 10–12 hours of full-power operation every night and at least 40 hours of work without sun or wind (equivalent to 4 cloudy days).

Powerful 40W LED light – ideal for roads and crossings

The LED fixture with an efficiency of 138–160 lm/W provides intense, uniform illumination essential for areas with increased risk, such as:

pedestrian crossings,
road intersections,
pedestrian and bicycle paths,
residential communication routes,
local roads and urban streets.

Why is the 40W hybrid LED street light so effective?

independence from the electrical grid – ideal for locations without infrastructure,
continuous operation thanks to both solar and wind energy,
low operating cost – no electricity bills,
automatic lighting control,
high resistance to weather conditions.

Applications of the 40W hybrid street light

road and street lighting,
pedestrian crossings,
intersections and high-risk zones,
parking areas and sidewalks,
residential and housing areas,
parks, green zones and cemeteries,
industrial facilities and remote locations.

Certified hybrid pole structure – safety and durability

The entire hybrid street light pole is manufactured in a single production facility, ensuring complete quality control and compliance with standards. Combining pole components from different manufacturers is strictly prohibited.

The photovoltaic panel bracket and the LED fixture arm offer a full 360° rotation, allowing precise positioning of the panels toward the sun and accurate direction of the light beam.

Materials and technical certifications

The structure is made of S235 steel and complies with the PN-EN 1090 standard, certified by an independent, notified certification body. Each pole is individually calculated for:

wind loads,
weight of the solar panels and wind turbine,
environmental conditions at the installation site.

The entire construction is protected with hot-dip galvanization according to EN ISO 1461, ensuring long-term corrosion resistance.

Premium LED fixture – ENEC / ZETOM, 5-year warranty

The Polish LED fixture used in the 40W hybrid lamp is certified with ENEC or ZETOM, guaranteeing top-level safety and manufacturing quality. Each LED fixture comes with a 5-year warranty.

Hybrid LED street lights 40W – the ideal choice for road lighting

The Hybrid LED Street Light 40W is a reliable and environmentally friendly solution for lighting roads, streets, pedestrian crossings and areas requiring dependable illumination around the clock. Hybrid LED street lights 40W combine power, autonomy and durability, ensuring user safety in all weather conditions.

To prepare a commercial offer / send detailed technical specifications, please

Contact

Hybrid street lamp: HLU-40W/400W/400W/6m

Hybrid street lamp: HLU-40W/400W/400W/6m
Wind turbine	Rated power: 400W 24V / Maximum output power: 500W Number of blades: 3 pcs. / Material – Carbon Fiber / Diameter: Ø 1330 mm + external charge controller, hermetic IP67 for wind turbine
Photovoltaic panel	Panel power: 1 x 450W 48V (144 cells) Monocrystalline cell, tempered solar glass (thickness 3,2 mm), covered with an anti-reflexive layer, panels tested in accordance with IEC 61215 for snow load of up to 5400 Pa (approx. 5,4 kN/m2).
LED lighting fitting Made in Poland	LED POWER: 40W DC – Polish Made LED Fixture PL LED luminous efficacy: 138 – 160 lm/W Service life: > 100,000 hours Protection degree: > IP66 Luminous Flux: > 5 500 lm (behind glass – after losses) Luminous Flux: > 6 400 lm (against losses - in front of glass) Working temperature: -40℃ ~ 60℃ Impact resistance: min. IK 09 Certificate: ZETOM or ENEC
Solar controller	1 pc x MPPT 20A 24V the light as well as time of operation by MPPT intelligent control, water resistance IP67 class, in-built twilight sensor, automatic brake and cut-off of powered load.
Battery	2 x 120AH 12V – NPG gel battery for solar installations, fully sealed, full deep discharge cycle, maintenance-free, > 2,000 discharge cycles
Battery box	PVC material, placed underground, water resistant type, disperses heat, anti-burglar, PVC pipe for the cables included in the set. Optional: enclosure made of stainless steel AISI 304 with EPDM gaskets (intended for installation in wet, rocky, clayey or otherwise challenging soil conditions).
Steel pole weight approx. 230 kg Made in Poland	Total height: 8m, hot-dip galvanised steel in accordance with EN ISO 1461. Pole model: "BrasiT", steel grade: S235, frame and bracket: steel S235. LED luminaire mounting height: 6 m Wall thickness of the steel pole base: > 6,3 mm Round pole compliant with EN 40-5:2002. Vehicle impact class: 0, in accordance with EN 12767. Structural stability certificates in accordance with EN 40-3-1. Hybrid pole structure in accordance with: PN-EN 1090 The pole, including the structure for photovoltaic panels and the boom arm for the wind turbine, is designed for wind zones I, II or III in accordance with PN-EN 1991-1-4. Frame for panels with extension arm for LED luminaire with the possibility of rotation around the axis of the pole 360º - independently.
Foundation weight approx. 450 kg	F-200 V43 M24, prefabricated foundation, certified, Meeting PN-EN 14991:2010 standard in accordance with the 2+ system adjusted to: I, II or III wind zone.
Working time	10-12 hours / day (full power) - battery capacity of up to 4 continuously cloudy and rainy days without sun - min. 40h without sun. There is the option of increasing the independence of lamps work. Five-period operating mode available: adjustable LED luminaire power (%) during night hours, enabling extended autonomous operation.

Notes:

The above system configurations are based on our actual project experience. They are suitable for areas with an average annual peak solar irradiation of 3.5–4 hours per day.The battery capacity is designed to store enough energy for 4 consecutive cloudy or rainy days.
The system configuration can be customized based on the specific requirements of the customer/project and local weather conditions.
The batteries are recommended to be installed underground inside a battery box. This prevents exposure to high summer temperatures and extreme winter cold. They are waterproof and theft-resistant, while also being very easy to replace later in the service life. The battery box can also be mounted above ground or on the lamp pole.
The pole can be customized to meet the customer’s specific requirements.
All components are compliant with required certificates and approvals.
The main structural elements — including the pole with a photovoltaic bracket and the foundation — are certified by an independent, notified certification body. They are safety-tested in terms of load-bearing requirements related to system weight and wind pressure at the intended installation site. The poles are certified according to: PNEN 1090 and EN 40-5 for special load-bearing and construction structures.
Any company that does not possess — or cannot provide — such certificates has no right to sell structures that may endanger public safety and could lead to a structural disaster.

The possibility of purchasing an infra-red remote control and Wi-Fi interface with software to program and control the lamps from a distance.
Poles can be painted in any colour from the RAL range for an additional price.

To prepare a commercial offer / send detailed technical specifications, please

Contact