Our offert

Solar street lamp 2x20W

2x20W Solar LED Street Light

2x20W Solar LED Street Light – high-efficiency dual street lighting

The 2×20W solar LED street light is a modern outdoor lighting system equipped with two independent LED luminaires mounted on a single pole. The dual bracket provides a significantly wider light coverage, making the illuminated area more uniform, safer and easier to navigate for users.

Solar LED street lights 2×20W operate fully autonomously – they rely solely on solar energy harvested by a high-efficiency photovoltaic panel and stored in a battery. This means zero energy costs, no cabling and easy installation even in locations without access to electrical infrastructure.

Dual 2×20W LED luminaires – stronger and wider illumination

The system uses two high-performance LED luminaires with a luminous efficacy of 138–160 lm/W. This configuration increases both the intensity and reach of the light, making it ideal for locations requiring evenly distributed illumination. Both brackets can be adjusted at any angle, allowing precise direction of the light according to the specific requirements of the road or area.

Polish-made LED luminaires – ENEC / ZETOM certified with 5-year warranty

Every LED luminaire used in the 2×20W system is manufactured exclusively in Poland and meets the highest quality standards. The luminaires hold ENEC or ZETOM certification, confirming electrical safety, component quality and compliance with European lighting standards. Each luminaire comes with a 5-year warranty.

Autonomous solar system – no wiring and zero energy costs

Solar street lights with dual LED luminaires operate using a photovoltaic panel, a high-capacity battery and an intelligent controller. The system automatically:

charges the battery during the day,
turns on the lighting after dusk,
manages energy depending on weather conditions,
operates year-round – at night, in winter and during overcast periods.

Durable, weather-resistant construction for long-term operation

The lamp’s structure is designed for intensive, long-term use. It is made from materials resistant to:

temperature fluctuations,
moisture and precipitation,
corrosion,
mechanical damage.

Applications of the 2×20W solar LED street light

The dual solar street light is ideal for illuminating:

local streets and access roads,
parking areas and sidewalks,
pedestrian and recreational paths,
residential and housing estates,
parks, green areas and recreational spaces,
locations without access to the electrical grid,
industrial and commercial areas.

Why choose the 2×20W solar LED street light?

The 2×20W solar LED street light provides exceptionally wide light coverage, complete energy independence and extremely low operating costs. 2×20W solar street lights are an ideal solution for investors, municipalities, developers and companies seeking effective, durable and eco-friendly lighting for public spaces.

Thanks to dual LED luminaires and full angle adjustment, the system offers maximum flexibility and high lighting efficiency in all conditions.

To prepare a commercial offer / send detailed technical specifications, please

Contact

Solar LED Street Lamp: SLU-2x20W/400W/6m

Solar Street Light: SLU-2x20W/400W/6m
Photovoltaic panel	Panel power: 1 x 450W 48V (144 cells) HALF-CUT Monocrystalline cell, tempered solar glass (thickness 3,2 mm), covered with an anti-reflexive layer, panels tested in accordance with IEC 61215 for snow load of up to 5400 Pa (approx. 5,4 kN/m2)
LED lighting fitting	LED POWER: 2x20W DC – Polish Made LED Fixture PL LED luminous efficacy: 138 – 160 lm/W Service life: > 100,000 hours Protection degree: > IP66 Luminous Flux: > 2 x 2,800 lm (behind glass – after losses) Luminous Flux: > 2 x 3,100 lm (against losses - in front of glass) Working temperature: -40℃ ~ 60℃ Impact resistance: min. IK 09 Certificate: ZETOM or ENEC
Solar controller	1 pc x MPPT 20A 24V the light as well as time of operation by MPPT intelligent control, water resistance IP67 class, in-built twilight sensor, automatic brake and cut-off of powered load.
Battery	2 x 120AH 12V – NPG gel battery for solar installations, fully sealed, full deep discharge cycle, maintenance-free, > 1,800 discharge cycles
Battery box	PVC material, placed underground, water resistant type, disperses heat, anti-burglar, PVC pipe for the cables included in the set. Optional: enclosure made of stainless steel AISI 304 with EPDM gaskets (intended for installation in wet, rocky, clayey or otherwise challenging soil conditions).
Steel pole weight approx. 230 kg Made in Poland	Total height: 7m, hot-dip galvanised steel in accordance with EN ISO 1461. Pole model: "BrasiT", Steel grade: S235, frame and bracket: steel S235 LED luminaires mounting height: 6 m Wall thickness of the steel pole base: > 6,3 mm Round pole compliant with EN 40-5:2002. Vehicle impact class: "0" class in accordance with EN 12767. Structural stability certificates in accordance with EN 40-3-1. Solar pole structure in accordance with: PN-EN 1090 The pole, including the structure for photovoltaic panels, is designed for wind zones: I, II or III in accordance with PN-EN 1991-1-4. Frame for panels with extension arm for LED luminaire with the possibility of rotation around the axis of the pole 360º - independently.
Foundation weight approx. 400 kg	B-160 (1600/400) - 4xM24/250, prefabricated foundation, certified, Meeting PN-EN 14991:2010 standard in accordance with the 2+ system adjusted to: I, II or III wind zone.
Working time	10-12 hours / day (full power) - battery capacity of up to 4 continuously cloudy and rainy days without sun - min. 40h without sun. There is the option of increasing the independence of lamps work. Five-period operating mode available: adjustable LED luminaire power (%) during night hours, enabling extended autonomous operation.

Notes:

The above system configurations are based on our actual project experience. They are suitable for areas with an average annual peak solar irradiation of 3.5–4 hours per day.The battery capacity is designed to store enough energy for 4 consecutive cloudy or rainy days.
The system configuration can be customized based on the specific requirements of the customer/project and local weather conditions.
The batteries are recommended to be installed underground inside a battery box. This prevents exposure to high summer temperatures and extreme winter cold. They are waterproof and theft-resistant, while also being very easy to replace later in the service life. The battery box can also be mounted above ground or on the lamp pole.
The pole can be customized to meet the customer’s specific requirements.
All components are compliant with required certificates and approvals.
The main structural elements — including the pole with a photovoltaic bracket and the foundation — are certified by an independent, notified certification body. They are safety-tested in terms of load-bearing requirements related to system weight and wind pressure at the intended installation site.
The poles are certified according to: EN 1090 and EN 40-5 for special load-bearing and construction structures.
Any company that does not possess — or cannot provide — such certificates has no right to sell structures that may endanger public safety and could lead to a structural disaster.

More solar streetlight models are available on our website:
https://www.brasit.pl/nasza-oferta/solarne-lampy-uliczne

The possibility of purchasing an infra-red remote control and Wi-Fi interface with software to program and control the lamps from a distance.
Poles can be painted in any colour from the RAL range for an additional price.

To prepare a commercial offer / send detailed technical specifications, please

Contact