Our offert

Solar street lamp 30W

30W Solar LED Street Light

30W LED Solar Street Light – Efficient and Eco-Friendly Lighting for Roads, Streets and Public Areas

The 30W LED solar street light is a modern, energy-efficient lighting solution designed for illuminating streets, local roads, pedestrian pathways, parking areas, residential zones, parks, and locations without access to electrical infrastructure. Its fully autonomous operation eliminates the need for cable routing and significantly reduces investment costs.

30W solar LED street lights use a high-efficiency photovoltaic panel, long-life battery and an intelligent controller that ensure automatic operation after dusk, full energy independence and stable lighting throughout the year – even in harsh weather conditions.

Professional 30W solar-powered LED street lighting

The 30W solar system has been engineered for effective illumination of public areas, roads and pedestrian routes. Thanks to modern LED diodes with an efficiency of 138–160 lm/W, the lamp generates a strong, uniform light output, improving visibility and user safety.

Polish-made LED luminaire – ENEC / ZETOM certification and 5-year warranty

The 30W model is equipped exclusively with a Polish-manufactured LED luminaire, produced according to the highest industry standards. The luminaire is certified with ENEC or ZETOM, confirming electrical safety, light quality, component durability and compliance with European lighting standards. Each luminaire is covered by a 5-year warranty.

Solar pole compliant with PN-EN 1090 – certified steel structure

The load-bearing structure of the system – including the S235 steel pole and the S235 bracket and support frame – is manufactured in accordance with the European standard PN-EN 1090, supervised by an independent, notified certification body. PN-EN 1090 guarantees full structural safety, correct load-bearing capacity and resistance to mechanical stresses.

All steel components are hot-dip galvanized according to EN ISO 1461, ensuring long-term resistance to corrosion, moisture and environmental conditions.

Photovoltaic mounting frame and 360° adjustable arm – optimal lamp positioning

The mounting frame for the photovoltaic panel and the LED luminaire arm offer full adjustment and 360° rotation around the pole axis. This allows the panel to be set at the optimal angle towards the sun, while the LED luminaire can be precisely aimed at the area requiring illumination. This is essential for maximizing system efficiency and ensuring the highest lighting quality.

Full wind-load certification – wind zones I, II and III

30W solar street lights installed on solar poles are always calculated for loads associated with:

the total weight of the PV system,
the surface area of the panel and wind pressure,
the requirements of wind zones I, II and III according to PN-EN 1991-1-4.

This ensures safe operation in all regions – from urban areas to open spaces exposed to strong wind gusts.

All pole components from one manufacturer – guaranteed structural safety

The entire solar pole is manufactured by a single producer. Mixing components from different manufacturers is not permitted, as it compromises structural integrity and prevents proper certification and compliance with PN-EN standards.

A unified production process ensures:

technological consistency of the structure,
higher durability and system stability,
full manufacturer responsibility for safety and quality,
compliance with European construction standards.

Applications of the 30W LED solar street light

local roads and urban streets,
sidewalks, alleys, pedestrian and bicycle pathways,
parking lots, public squares and recreational areas,
residential zones and living areas,
locations without access to electrical power,
private properties and commercial sites.

Why choose the 30W LED solar street light?

The 30W LED solar street light combines high performance, Polish-made quality, certified structural components and complete energy autonomy. 30W solar LED street lights are among the most popular solutions for illuminating roads, parking lots, pathways and residential areas, offering strong light output, long service life and minimal operating costs.

To prepare a commercial offer / send detailed technical specifications, please

Contact

Solar Street Lamp: SLU-30W/400W/6m

Solar Street Light: SLU-30W/400W/6m
Photovoltaic panel	Panel power: 1 x 450W 48V (144 cells) HALF-CUT Monocrystalline cell, tempered solar glass (thickness 3,2 mm), covered with an anti-reflexive layer, panels tested in accordance with IEC 61215 for snow load of up to 5400 Pa (approx. 5,4 kN/m2).
LED lighting fitting	LED POWER: 30W DC – Polish Made LED Fixture PL LED luminous efficacy: 138 – 160 lm/W Service life: > 100,000 hours Protection degree: > IP66 Luminous Flux: > 4,100 lm (behind glass – after losses) Luminous Flux: > 4,800 lm (against losses - in front of glass) Working temperature: -40℃ ~ 60℃ Impact resistance: min. IK 09 Certificate: ZETOM or ENEC
Solar controller	1 pc. x MPPT 20A 24V the light as well as time of operation by MPPT intelligent control, water resistance IP67 class, in-built twilight sensor, automatic brake and cut-off of powered load.
Battery	2 x 100AH 12V – NPG gel battery for solar installations, fully sealed, full deep discharge cycle, maintenance-free, > 2,000 discharge cycles
Battery box	PVC material, placed underground, water resistant type, disperses heat, anti-burglar, PVC pipe for the cables included in the set. Optional: enclosure made of stainless steel AISI 304 with EPDM gaskets (intended for installation in wet, rocky, clayey or otherwise challenging soil conditions).
Steel pole weight approx. 210 kg Made in Poland	Total height: 7m, hot-dip galvanised steel in accordance with EN ISO 1461. Pole model: "BrasiT", Steel grade: S235, frame and bracket: steel S235 LED luminaire mounting height: 6m Wall thickness of the steel pole base: > 6,3 mm Round pole compliant with EN 40-5:2002. Vehicle impact class: "0" class in accordance with EN 12767. Structural stability certificates in accordance with EN 40-3-1. Solar pole structure in accordance with: PN-EN 1090 The pole, including the structure for photovoltaic panels, is designed for wind zones: I, II or III in accordance with PN-EN 1991-1-4. Frame for panels with extension arm for LED luminaire with the possibility of rotation around the axis of the pole 360º - independently.
Foundation weight approx. 400 kg	B-160 (1600/400) - 4xM24/250, prefabricated foundation, certified, Meeting PN-EN 14991:2010 standard in accordance with the 2+ system adjusted to: I, II or III wind zone.
Working time	10-12 hours / day (full power) - battery capacity of up to 4 continuously cloudy and rainy days without sun - min. 44h without sun. There is the option of increasing the independence of lamps work. Five-period operating mode available: adjustable LED luminaire power (%) during night hours, enabling extended autonomous operation.

Notes:

The above system configurations are based on our actual project experience. They are suitable for areas with an average annual peak solar irradiation of 3.5–4 hours per day.The battery capacity is designed to store enough energy for 4 consecutive cloudy or rainy days.
The system configuration can be customized based on the specific requirements of the customer/project and local weather conditions.
The batteries are recommended to be installed underground inside a battery box.This prevents exposure to high summer temperatures and extreme winter cold.They are waterproof and theft-resistant, while also being very easy to replace later in the service life. The battery box can also be mounted above ground or on the lamp pole.
The pole can be customized to meet the customer’s specific requirements.
All components are compliant with required certificates and approvals.
The main structural elements — including the pole with a photovoltaic bracket and the foundation — are certified by an independent, notified certification body. They are safety-tested in terms of load-bearing requirements related to system weight and wind pressure at the intended installation site.
The poles are certified according to: EN 1090 and EN 40-5 for special load-bearing and construction structures.
Any company that does not possess — or cannot provide — such certificates has no right to sell structures that may endanger public safety and could lead to a structural disaster.

More solar streetlight models are available on our website:
https://www.brasit.pl/nasza-oferta/solarne-lampy-uliczne

The pole can be powder-coated in any color from the RAL palette for an additional charge.
It is possible to purchase a wireless infrared remote control with LCD display, or a Wi-Fi interface with software for remote programming and control of the lamps.
An ECO version of the solar street lamp is available — mounted on an octagonal pole.

To prepare a commercial offer / send detailed technical specifications, please

Contact