Our offert

Solar street lamp 40W

40W Solar LED Street Light

40W Solar LED Street Light – independent and eco-friendly outdoor lighting

The 40W solar LED street light is an advanced lighting solution that operates fully autonomously, without the need for connection to the electrical grid. A high-efficiency photovoltaic panel charges a large-capacity battery, and the energy accumulated during the day powers the lamp throughout the night. This makes installation fast and operating costs close to zero.

The 40W LED illumination provides an intense, uniform beam of light that increases safety for users of roads, sidewalks, parking areas, and recreational spaces. An intelligent controller automatically manages the lamp’s operation, ensuring optimal energy management.

How does the 40W solar LED lamp work?

The solar system in the 40W LED model is designed to operate maintenance-free all year round. The system includes:

Photovoltaic panel – capturing solar energy and converting it into electricity.
High-capacity battery – ensuring lamp operation even on cloudy days.
Intelligent controller – managing charging, operating time, and brightness.
High-power 40W LED diodes – responsible for bright and stable illumination of public spaces.
Dusk sensor – automatically switches the lamp on after sunset.

Main features and advantages of the 40W solar LED lamp

40W LED – high luminous efficiency and wide lighting range.
100% solar energy – no electricity costs and full energy independence.
Automatic operation – the lamp regulates its lighting time on its own.
Weather resistance – safe operation all year long.
Fast and non-invasive installation – ideal for locations without access to infrastructure.
Ecological operation – zero CO₂ emissions and reduced energy consumption.
5-year warranty – confirmation of quality and long system lifespan.

Polish-made luminaire – highest PL quality

The lighting fixture used in this model is manufactured in Poland. This ensures a product made according to strict quality standards, with guaranteed availability of spare parts and professional technical support. Domestic production also means higher durability, better control over the manufacturing process, and stable technical parameters.

Luminaires certified with ENEC or ZETOM

The lamp uses certified LED luminaires bearing the ENEC mark or the national ZETOM certificate. These documents confirm that the luminaires meet European requirements for electrical safety, material quality, and lighting performance. This ensures that the product complies with design guidelines, construction regulations, and EU standards.

Solar pole structure compliant with PN-EN 1090

The pole on which the solar lamp is mounted is manufactured in accordance with the PN-EN 1090 standard. This European norm defines rules for the design, production, and inspection of steel and aluminum structures. It means that every stage — from materials, through welding, to finishing — is subject to strict quality procedures.

Thanks to PN-EN 1090, the pole structure guarantees proper strength, stability, and safety during many years of outdoor use.

Solar pole adapted for wind zones I, II and III

The entire pole structure, including the PV mounting bracket, has been calculated and adapted for wind zones I, II and III according to PN-EN 1991-1-4. This takes into account real loads caused by strong wind, side gusts, and wind pressure on the photovoltaic panel. As a result, the lamp remains fully stable even under demanding atmospheric conditions — in open areas, near the coastline, or in elevated terrain.

Solar pole construction manufactured in one facility – why is it so important?

The entire solar pole, together with the supporting structure for the photovoltaic panel, is produced exclusively by one manufacturing plant. Combining elements from different manufacturers is not permitted, as it may cause:

lack of structural consistency and reduced load-bearing capacity,
compatibility issues and installation problems,
difficulties in obtaining certificates and compliance documentation,
lack of full manufacturer responsibility for the complete structure.

Unified production ensures technical consistency, durability, safety, and the ability to provide complete compliance documentation for the pole as a single, fully certified product.

Applications of the 40W solar LED lamp

lighting of streets and local roads,
sidewalks, pedestrian crossings, and walking paths,
parking lots and public squares,
parks, gardens, and recreational areas,
residential areas and industrial sites,
locations remote from the electrical grid.

Why choose the 40W solar LED street lamp?

This model combines high luminous efficiency, durable construction, and full energy independence. Polish-made luminaires, certified components, a pole compliant with PN-EN 1090, and wind-zone-ready structure (I–III) make this lamp an ideal long-term solution for public spaces. It is an investment that reduces costs, increases safety, and supports sustainable urban infrastructure.

To prepare a commercial offer / send detailed technical specifications, please

Contact

Solar LED Street Lamp: SLU-40W/400W/6m

Solar Street Light: SLU-40W/400W/6m
Photovoltaic panel	Panel power: 1 x 450W 48V (144 cells) HALF-CUT Monocrystalline cell, tempered solar glass (thickness 3,2 mm), covered with an anti-reflexive layer, panels tested in accordance with IEC 61215 for snow load of up to 5400 Pa (approx. 5,4 kN/m2).
LED lighting fitting	LED POWER: 40W DC – Polish Made LED Fixture PL LED luminous efficacy: 138 – 160 lm/W Service life: > 100,000 hours Protection degree: > IP66 Luminous Flux: > 5,500 lm (behind glass – after losses) Luminous Flux: > 6,400 lm (against losses - in front of glass) Working temperature: -40℃ ~ 60℃ Impact resistance: min. IK 09 Certificate: ZETOM or ENEC
Solar controller	1 pc x MPPT 20A 24V the light as well as time of operation by MPPT intelligent control, water resistance IP67 class, in-built twilight sensor, automatic brake and cut-off of powered load.
Battery	2 pcs. x 120AH 12V – NPG gel battery for solar installations, fully sealed, full deep discharge cycle, maintenance-free,> 2,000 discharge cycles
Battery box	PVC material, placed underground, water resistant type, disperses heat, anti-burglar, PVC pipe for the cables included in the set. Optional: enclosure made of stainless steel AISI 304 with EPDM gaskets (intended for installation in wet, rocky, clayey or otherwise challenging soil conditions).
Steel pole weight approx. 210 kg Made in Poland	Total height: 7m, hot-dip galvanised steel in accordance with EN ISO 1461. Pole model: "BrasiT", Steel grade: S235, frame and bracket: steel S235 LED luminaire mounting height: 6m Wall thickness of the steel pole base: > 6,3 mm Round pole compliant with EN 40-5:2002. Vehicle impact class: 0, in accordance with EN 12767. Structural stability certificates in accordance with EN 40-3-1. Solar pole structure in accordance with: PN-EN 1090 The pole, including the structure for photovoltaic panels, is designed for wind zones: I, II or III in accordance with PN-EN 1991-1-4. Frame for panels with extension arm for LED luminaire with the possibility of rotation around the axis of the pole 360º - independently.
Foundation weight approx. 400 kg	B-160 (1600/400) - 4xM24/250, prefabricated foundation, certified, Meeting PN-EN 14991:2010 standard in accordance with the 2+ system adjusted to: I, II or III wind zone.
Working time	10-12 hours / day (full power) - battery capacity of up to 4 continuously cloudy and rainy days without sun - min. 40h without sun. There is the option of increasing the independence of lamps work. Five-period operating mode available: adjustable LED luminaire power (%) during night hours, enabling extended autonomous operation.

Notes:

The above system configurations are based on our actual project experience. They are suitable for areas with an average annual peak solar irradiation of 3.5–4 hours per day.The battery capacity is designed to store enough energy for 4 consecutive cloudy or rainy days.
The system configuration can be customized based on the specific requirements of the customer/project and local weather conditions.
The batteries are recommended to be installed underground inside a battery box.
This prevents exposure to high summer temperatures and extreme winter cold.
They are waterproof and theft-resistant, while also being very easy to replace later in the service life.
The battery box can also be mounted above ground or on the lamp pole.
The pole can be customized to meet the customer’s specific requirements.
All components are compliant with required certificates and approvals.
The main structural elements — including the pole with a photovoltaic bracket and the foundation — are certified by an independent, notified certification body. They are safety-tested in terms of load-bearing requirements related to system weight and wind pressure at the intended installation site.
The poles are certified according to: PN-EN 1090 and EN 40-5 for special load-bearing and construction structures.
Any company that does not possess — or cannot provide — such certificates has no right to sell structures that may endanger public safety and could lead to a structural disaster.

More solar streetlight models are available on our website:
https://www.brasit.pl/nasza-oferta/solarne-lampy-uliczne

The pole can be powder-coated in any color from the RAL palette for an additional charge.
It is possible to purchase a wireless infrared remote control with LCD display, or a Wi-Fi interface with software for remote programming and control of the lamps.
An ECO version of the solar street lamp is available — mounted on an octagonal pole.

To prepare a commercial offer / send detailed technical specifications, please

Contact